> ## Documentation Index
> Fetch the complete documentation index at: https://docs.cloneable.ai/llms.txt
> Use this file to discover all available pages before exploring further.

# Prepare a job for Cable Tracing

> Check that a job has the photos, spans, configuration and organization setting it needs for Cable Tracing, then open Cable Tracing from the Utility Map.

Check these things before you trace a job, so you don't have to stop partway through a line to wait for a missing photo or setting. Then you can open the job in Cable Tracing.

## Requirements

| What you need | Why you need it | Where it comes from |
| - | - | - |
| Measured pole photos | Cloneable reads heights from these calibrated photos. | Fielders capture each pole in the Cloneable app. |
| Midspan photos | These give each wire its height at the midspan. | Fielders capture one on each span you want measured. |
| Spans between the poles | These tell Cloneable which pole comes next. | They're drawn in the field or on the map. |
| A configuration set up for Cable Tracing | You choose parts and framings from its pick list, and the exports use them. | It's built from your DDS standards or your [SPIDAcalc client file](https://docs.cloneable.ai/guides/integrations/spidacalc/client-file.md). Select it when you create the job. |
| Cable Tracing turned on for your organization | The **Cable Tracing** button only appears when it's on. | Ask Cloneable support to turn it on, using the chat in Cloneable. |
| DDS or SPIDAcalc turned on for your organization | You need this to build a configuration from your DDS standards or SPIDAcalc client file. DDS export also needs it. | Ask Cloneable support to turn it on, using the chat in Cloneable. |

## Open Cable Tracing

**1. Open the job on the map**

Go to **Utility Map** and choose one job. Cable Tracing works on one job at a time.

**2. Click Cable Tracing**

In the map toolbar on the left, hover over the cable icon shown below until you see **Cable Tracing**, and then click it.

![The utility map with a seven-pole job and the Cable Tracing button outlined in the left toolbar](https://mintcdn.com/cloneable/JI5h3XifL4I2sezO/images/tracing/toolbar-trace-wires.jpg?fit=max\&auto=format\&n=JI5h3XifL4I2sezO\&q=85\&s=dffdb69eee9602350bdc01004ac44a21)

The map switches to Cable Tracing, and the bar at the bottom shows **Click a pole to start**.

## If you can't click Cable Tracing

Hover over the button to see why it's unavailable.

| What you see | Why it happens | What to do |
| - | - | - |
| **Select one job to use Cable Tracing** | You have no job selected, or more than one. | Choose a single job. |
| **Cable Tracing needs a pick-list configuration** | This job uses an older configuration that isn't set up for Cable Tracing. | Contact Cloneable support to copy the job to a configuration that is. Don't add a pick list to the older configuration, because that also changes how its other jobs work. |

Next: [Trace a line](https://docs.cloneable.ai/guides/tracing/trace-a-line.md).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.